Tag: AC

Prevention is better than cure. Major automotive troubles do not happen overnight so there are ways by which we can avoid costly car repair and auto service. Before our engines break down, there are warning signs that we can observe if we are keen about it. If you experience on of these warning signs, then you will most likely find yourself in an auto repair shop transacting with an automotive mechanic.

1. DIFFICULTY IN STEERING.

If you are having a difficulty in steering your vehicle in a straight line, your front wheels are probably misaligned or your car’s steering parts are all worn out. You need to replace these immediately to avoid major auto repair.

2. UNUSUAL VIBRATIONS

Vibrations beyond the normal range we experience when our car engines are running might lead to the loosening of important screws and automotive parts. If you observe this, consult with your mechanic so you can schedule a diagnostic asap.

3. PROBLEMS WITH BRAKES

There are three common problem with brakes that we experience as car owners. One is when the brake pedals sinks to the floor; two is when the car pulls to one side when we step on brakes; and three is when there is a scraping or grinding sound when we hit the brake pedal. Brakes are one of the automotive parts that ensure our safety on the road. If we observe these warning signs, do not hesitate and go to your automotive mechanic immediately.

4. PROBLEMS WITH CAR ENGINES

If your car is hard to start, then you might be experiencing engine trouble. Troubles with car engines are also indicated when the check engine light is persistently coming on, you car is using more oil, the car engine continuously runs even after removing the key, if your car has poor acceleration, and if the car stalls or idles roughly. If these happens to your vehicle, go to an auto repair shop as soon as possible.

5. PROBLEMS WITH TRANSMISSION

A delayed response when shifting from neutral gear to drive or reverse often signals the problem with transmission. Other warning signs that you should notice so that you can go to an auto repair shop for transmission service are if your car does not shift during regular acceleration, or if the engine speeds up but the car does not move or respond in any way.

The best way to deal with these warning signs aside from immediately going to an automotive mechanic is proper maintenance and car care. Change your oil regularly. Make sure that your tires are properly inflated. Maintain proper fluid levels. Do not forget to have your engine tuned and your engine belts inspected on a regular basis. Also, routinely check your batteries, battery cables and posts, windshield and its washer blades, and air filtration system to avoid auto AC repair. Washing your car regularly prevents build up of dirt that can cause damages to your vehicle. Lastly, find a great mechanic that will be of great help and assistance to you.

ABC Autotech, Inc.
4411 30th Street W
Bradenton, FL 34207
(941) 755-0112
http://www.abcautotech.com/

Your automotive transmission is a vital part of your vehicle. You therefore have no choice but to have your automotive transmission system repaired when it breaks down. Automotive transmission repair can be very expensive, though, in Tampa and in any other area in the United States. You should, therefore, observe proper automotive transmission maintenance procedures in order to minimize the need for automotive transmission repair or at least postpone it as much as possible. When you do need automotive transmission repair, however, you have to make sure you bring your vehicle only to an auto service mechanic who is the best automotive transmission expert in Tampa. Your car repair mechanic should not just know about diagnostics, auto AC repair or automotive engine and brakes repair. Having the best maintenance and repair support will help you avoid tow truck towing services.

According to reliable auto service mechanics, many automotive transmission diagnostic checks and preventive maintenance procedures can be done by vehicle owners themselves day by day. There is no need to take the vehicle to the auto service shop in Tampa and spend extra for these.

A vehicle owner should regularly inspect the area beneath the vehicle for any puddles or wet spots that indicate the presence of a leak. A vehicle that leaks transmission fluid has a damaged transmission system. The vehicle’s transmission fluid should also be regularly checked with a clean dipstick. The transmission fluid should be allowed to drip from the dipstick to a clean sheet of white paper. The fluid should be a transparent red. If the fluid is dark colored or has dark flakes or metal filings, or if it smells burnt, this means the transmission fluid has oxidized. This should be your signal to immediately bring the vehicle to your Tampa mechanic.

The vehicle owner should always stay observant of how the vehicle performs while it is being driven. The automotive transmission should immediately engage without delay and the car should be ready to move forward when shifted from the park position to the drive position. There should be no jerks felt nor strange sounds heard from the vehicle. The same quick, smooth and quiet response should occur when the car is shifted from drive to neutral, and to reverse. The same should be true when accelerating or decelerating. The vehicle should never lag in responding to gear shifts. Observe the vehicle while still cold and when heated through. Sometimes, problems only show up when the engine has been heated. If the vehicle shudders, jerks or makes odd sounds at any time, take it for a diagnostic check up with your Tampa mechanic.

Make sure your vehicle does not overheat because overheating can damage the automotive transmission system. Overheating burns up and oxidizes the transmission fluid. This creates flakes and deposits that then clog the system. Overheating also warps the automotive transmission system’s metal parts and hardens its rubber seals and gaskets, often resulting in leaks and, ultimately, failure of the system. In Tampa, the intense heat of the sun can make overheating a normal occurrence, especially in stop and go driving in the midst of heavy traffic. If the vehicle is overloaded, this can add to the possibility of overheating.

Once you have observed all the recommended automotive transmission preventive maintenance procedures, you have already done everything you could to prevent the premature need for automotive transmission repair. When the time for unavoidable automotive transmission repair does come, your remaining responsibility is to leave it to the experts and bring your vehicle to your trusted auto service mechanic whose specialization is car automotive transmission repair in Tampa.

If you are looking for automotive equipment distributors you don’t have to worry as most of the things are available online. You can get the most comprehensive list of tools and equipment, through distributors specializing in auto equipment supplies. These equipments are high-quality and you can get a wide range of choices too.

You can browse through groups of equipment which include light and heavy tools and hand tools as well. The websites for automotive tools and equipment are your one stop shop for design, sales, service and installation of equipment for automotive shops, fleet maintenance and the commercial market.

The equipment is of the highest quality and durability. There are regular promotions on specialized equipment which are available at discounted rates from automotive equipment distributors. The ranges of products available are extensive and are divided into organized categories, from which you can select according to your requirements.

Heavy Equipment

This grade includes auto lift equipment among which are mid-rise, in-ground, two posts and four posts, motorcycle lifts and specialty lifts among others. Among auto lift equipment you can find bumper lifts, wheel alignment lift parts accessories and adaptors. You can find Hunter wheel alignment parts too in this range.

Heavy automotive equipment includes brake lathes accessories and parts, nitrogen accessories, wheel alignment, tire changing equipment and wheel balancers. You can find the best welding tools, plasma cutters and metal lathes among these categories.

Light Equipment

If you are looking for diagnostic, AC and emission categories of equipment you can find it in this category. Auto repair service companies can find the best range for all their needs. This range includes auto lifting equipment such as axle jacks, clutch and fly wheel handlers and . Service station solutions can be found among which brake repair systems and fluid management among others are. Electrical system, headlight aimers, heating and cooling, lighting equipment are of various types. Exhaust ventilation accessories, components and systems are also available.

Hand Tools

Automotive equipment distributors have a range of hand tools which fall in various categories.

* Power tools: among these are impact guns, heat guns, ratchets, flashlights and dc/ac power invertors and hammer drills among others. * Pneumatic: angle grinders, cut off tools, hammers and chisels and rock drills. * Specialty: these tools include exhaust service, fuel injection and pump, and general service tools. * Paint and auto body: the specialized tools in this category include paint curing systems, compounds, cleaners and waxes, buff polishing and sanding among others. * Hammers: these are of many types including dead blow and peening.

Under miscellaneous category range, you can find propane torches, personal safety equipment, parts cleaning tools, manuals, books and service guides and many others.

Automobile equipment distributors supply the finest range of equipment which can enhance the productivity of any automotive related businesses. They have the best solutions in automotive accessories of all types for every need. You can register online on their website and shop for any category securely and easily. You get the best automotive tools through online equipment distributors.

The automobile industry relies heavily on batteries. For a number of reasons, a person has to use an automotive battery, since it is not possible to get direct electricity supply in a running vehicle. For instance, did you ever wonder how does your car”s light get its power? Or how, for example, do you run the AC in your automobile even though you don”t have to pay any electric bill for it? All these are fuelled by the car”s battery! It is vital that the battery which is being used in a vehicle is a high quality one. That is one reason why the popularity of automotive lithium polymer battery China has soared with time.

It has appeared as a cost-effective solution to the general needs of an average vehicle owner. It offers light weight and is economic because of its low maintenance and long life. There are many reasons why the manufacturers have expressed their satisfaction over use of these batteries while making cars. Here are some of them:

i. Light in weight: Batteries which are made of lithium polymer are very light in weight. It is always preferable that the vehicle doesn”t have to put up with a heavy load. The problem with installing conventional batteries is that they put a lot of extra weight to the automobile which adds to the friction and reduces the fuel efficiency of the car. On the other hand, automotive battery made of lithium polymer offers lightness and thus increases the fuel efficiency.

ii.Small in size: Another advantage they enjoy is that these batteries are miniscule in size. One of the key reasons why they are so small is that they enjoy greater energy efficiency. So, the manufacturer can easily derive adequate power even with a battery which is a shade smaller (and lighter) in size & weight. Being small, they do not require much space inside the vehicle. So, the automobile manufacturers can come up with vehicles which are smaller, lighter and more economic.

iii.Good restoration power: They offer great storage capacity. The vehicle owner can put his reliance on an automotive lithium polymer battery fully, since these products do not generally run out of charge. They also have a very good life. So, once you get them installed in the car, you won”t have to worry about any replacement for quite a few years.

iv.Reasonably safe: An automotive battery China made of lithium polymer is quite safe. In fact, contrary to the general notion that these batteries are dangerous, they have become quite risk-free. Over the past decade, the manufacturers have adopted better technologies to guarantee higher safety. So, they do not cause any problem as such and do not radiate excessive heat even during extreme usage.

v.Cost effective: As explained above, automotive lithium polymer battery is very cost-effective. These batteries may cost a bit more while purchasing them. But they last for many more years and depreciate very slowly. So, the rate of consumption per year certainly works to the advantage of the consumers.

Keeping all these factors into consideration, it can be concluded that this form of battery has empowered automobile manufacturers with greater flexibility and more feasible options.

The execution of all required automotive diagnostic and maintenance procedures according to their proper schedules will be an efficient way of minimizing the need for frequent and unnecessary car repairs. At a time like this when most everyone is in the midst of financial hardships, any vehicle owner will truly be in dire need of the savings that can be acquired from such moves. After all, when one adds up the costs of various car repair procedures such as auto AC repair, brakes repair, transmission repair and engine repair, the resulting figure could be mind boggling.

Even more savings can be achieved by vehicle owners if they themselves take on the responsibility of doing some basic maintenance procedures instead of always relying on a paid auto service mechanic for every maintenance task. Of course this should not be equated with totally doing away with a reliable and highly skilled auto service mechanic. The services of such a mechanic will still be very necessary for more complex automotive diagnostic and maintenance procedures and car repair. Any vehicle will surely be in need of car repair sooner or later in spite of the best maintenance regimen. With the help of a trustworthy auto service mechanic, a vehicle owner can come up with a checklist of automotive diagnostic and maintenance procedures and car repair tips.

First of all, the vehicle owner should thoroughly read the vehicles owners manual. The contents of this document are crucial and should be given proper value. They need not be memorized but since they will be needed from time to time, the vehicle owner should keep the manual handy in a safe location that is easy to access. Remember that the manufacturers recommendations on all the required automotive maintenance procedures for the vehicle, as well as the required frequency and schedule of all those procedures, are documented in the manual. All of these guidelines have to be complied with if the vehicle owner wants to keep the vehicle in its best condition.

To be able to immediately detect unusual spikes in the vehicles gasoline usage and all fluid depletions, the vehicle owner has to do daily gauge readings of fluid levels and gas mileage. To be able to immediately detect wear and tear or damage to the vehicles tires, hoses and belts, the vehicle owner has to make regular inspections of these components.

As soon as the vehicle owner observes any unusual noise, strange odor, leak or vibration coming from the vehicle, this should be considered as a possible sign of a vehicular problem. It should never be taken for granted. Some signs are actually emergency warnings that should be quickly acted upon. One example of such an emergency warning is smoke. When the vehicle owner sees smoke coming from the vehicle, the vehicle should promptly be pulled over. It should not be restarted at all costs and an auto service mechanic should be called for.

After the auto service mechanic has thoroughly checked the vehicle, the vehicle owner should request that a written copy of the diagnosis and recommended repairs be submitted. Before agreeing to any car repair, the vehicle owner should ask the auto service shop to first submit a written quotation detailing what needs to be done and their costs, as well as the job schedule.

The abovementioned recommended checklist of automotive diagnostic and maintenance procedures, if complied with faithfully and to the letter, will result in less frequent need for car repair and greater savings for vehicle owners. When the need for any kind of car repair does arise, whether auto AC repair, brakes repair, transmission repair, engine repair or any other procedure, the tips on what to demand from the auto service shop will likewise result in avoidance of unnecessary costs.